Water Filtration

What to Ask a Dallas Water Filtration Company Before You Sign Anything

US Home Comfort
November 15, 2026
Two whole-home water treatment tanks plumbed into a garage water line with bypass valves

A kitchen table at 7 p.m. is a bad place to learn how water treatment works. The equipment is already in the truck, the demo glass is already cloudy, and the paperwork is already printed. The fix is simple: decide what you're going to ask before anyone sits down. Below are twelve questions to put to any water filtration company in Dallas — ours included — covering licensing, sizing, what the install actually includes, warranty terms, and the difference between a real water test and a sales demo.

Good companies answer all twelve without flinching, and the paperwork check at the end takes five minutes. The answers are also how you compare two very different quotes on something other than the number at the bottom.

Questions about who is doing the work

1. Is the person installing my system a licensed Texas plumber, and can I see the license?

This is the first question for a reason. Texas plumbing law treats water treatment installations, exchanges, services and repairs as plumbing work, and it provides for a water supply protection specialist endorsement — see the Texas State Board of Plumbing Examiners' plumbing license law. Separately, the Texas Commission on Environmental Quality licenses Water Treatment Specialists under the Texas Water Code, the Health and Safety Code and the Occupations Code, in classes that define what a technician may install and service. Ask for a name and a license number, then look it up yourself. A company that cuts into your main water line is a company whose credentials you are allowed to verify.

2. Who physically shows up on install day — your crew or a subcontractor?

Plenty of systems are sold by one company and installed by whoever is available that week. That isn't automatically bad, but you should know it before you sign, because it decides who you call when a fitting weeps six months later. Ask who the installer works for, who carries the liability insurance, and who you contact for service — the seller or the installer.

3. Does my city require a permit or inspection, and who pulls it?

Requirements vary across Dallas, Plano, Frisco, Garland and the rest of the Metroplex, and some installations touch a drain, a bypass or a backflow concern. You don't need to know your city's code. You do need the company to tell you, in writing, whether a permit applies and that pulling it is their job, not yours.

Questions about the water test

4. What exactly are you measuring, and with what?

There's a meaningful difference between a measurement and a demonstration. A measurement produces numbers you can write down: hardness in grains per gallon (a count of the dissolved calcium and magnesium in your water), total dissolved solids, chlorine, pH, iron. A demonstration produces a reaction — cloudy water, colored water, a tank of sediment — and a story about what it means. Ask which one you're getting, and ask for the readings in writing, with units. Our walkthrough of what a free water test tells you and what it doesn't explains each reading in plain English.

5. How do your results compare with my utility's published water quality report?

Every public water system in Texas publishes an annual water quality report for its customers. A credible company will happily put its readings next to that report and explain any difference — usually because the utility measures water leaving the plant while your test measures water after it has traveled miles of pipe to your house. A company that waves off the city report and relies only on an in-home demo is telling you something.

6. Which of these results actually requires equipment, and which are cosmetic?

Hard water is real here, and so is chlorine taste. But not every reading on a test strip justifies another tank in your garage. Make the salesperson sort the list: what's a health-guideline issue, what's a scale-and-appliance issue, what's a taste-and-smell issue, and what simply doesn't matter at your levels. If the answer is "all of it," slow down. Our comparison of a whole house water filter vs. a water softener lays out which problem each piece of equipment is actually built to solve.

Questions about sizing and equipment

7. What size did you specify, and what numbers did you use to get there?

Sizing isn't a formality. A whole house water filtration system in Dallas has to pass enough flow for your peak demand — two showers and a dishwasher at once — and a softener has to hold enough capacity to carry your household through the week without regenerating constantly. The inputs are simple: number of people, number of bathrooms, your hardness number, and your main line size. Ask to see them. If the proposal names no numbers, the system was picked off a price sheet, not sized for your house. Our complete guide to whole house water filtration in Dallas covers sizing ranges by household.

8. Is this equipment certified by an independent lab, and certified for what exactly?

"Certified" on its own means nothing. Ask which standard and which claims. NSF notes that NSF/ANSI 42 covers filters certified to reduce aesthetic impurities such as chlorine and taste and odor, for both under-sink and whole-house systems, while NSF/ANSI 53 is the nationally recognized standard for evaluating and certifying drinking water treatment units for contaminant reduction. A reduction claim for a specific contaminant should trace back to a specific tested standard, not to a brochure adjective.

9. What happens to my water pressure?

Every tank you add is one more thing water has to move through. Ask for the rated flow in gallons per minute, ask what pressure drop to expect, and ask what the company does if the house feels weak afterward. Get that answer before install day, not after.

Questions about the install, the warranty and the paperwork

10. What's included in the installed price — line by line?

This is where two quotes that look similar stop being similar. Ask the company to list it out: new shutoff and bypass valves, the loop or tie-in at the main, drain line and air gap where required, any electrical work, sediment pre-filter, a dedicated line to the fridge or kitchen tap if you want one, haul-away of old equipment, permit fees, and cleanup. Then ask the opposite question: what is not included and would be billed later? For reference, our filter plus softener combo systems are $7,500 to $9,500 installed, sized to the home and put in by a licensed Texas plumber, with financing available.

11. What does the warranty cover — parts, labor, or both — and who honors it?

Three details decide whether a warranty is worth anything. First, parts versus labor: a long tank warranty that doesn't pay for the visit to swap the tank is half a warranty. Second, who honors it — the manufacturer, the dealer, or a third party — and what happens if the dealer closes. Third, what voids it: skipped service, a different brand of salt, a DIY repair. Ask for the written terms, not a verbal summary. The Clarity Whole Home Filter we install carries a five-year limited warranty, and we hand you the terms before you sign, not after.

12. What does owning this actually look like in year three?

Ask what has to be done and how often: salt, media life, cartridge changes, the regeneration schedule, who performs the service, and how service gets scheduled. Ask what the system does if the power goes out or you leave town for a month. A straight answer here tells you more about a company than any demo does.

One more thing worth reading before you sign: the money paperwork

Know whether you're buying equipment, financing equipment, or signing a long-term rental or service agreement — and know the total of payments, not just the monthly figure. This matters nationally: the Federal Trade Commission announced in 2024 that its action against Aqua Finance, a company that gave dealers financing programs for door-to-door sales of home water treatment equipment, led to $43.6 million in financial relief for consumers.

Also know your cancellation rights. The Texas State Law Library points out that no Texas law gives a universal three-day right to cancel a contract — that's a common misconception. But TexasLawHelp explains that Chapter 601 of the Texas Business & Commerce Code regulates home solicitation, where a buyer has the right to cancel until midnight of the third business day after signing. If the sale happened in your living room, ask the company to show you the cancellation language in the contract.

How we'd answer these at US Home Comfort

H2O Clarity by US Home Comfort is the water side of our business, and we start every job the same way: with a free water report tied to your address, so the conversation begins with what's actually in your water instead of what's in the truck. Systems are sized to the home and installed by a licensed Texas plumber. Our filter plus softener combos are $7,500 to $9,500 installed, with financing available, and the install scope and warranty terms go in front of you before anything is signed.

Start with your numbers, not the pitch. Get your free water report for your Dallas address, then bring these twelve questions to whoever you're considering. The company worth hiring will be glad you asked.